'good thinking.. after seeing
this and another DIY cleaning vid
ive just started peicing together something similar to clean out a bunch of injectors
i have.'
'for pulsing the injector u could use an indicator relay to do it automatically while its connected up to
power..'
Q. how are you controlling how much voltage goes to the injector? there is
a very specific range of voltage injectors work on, anything higher could destroy them A. High impedance fuel injectors work on unregulated voltage, it can
work perfectly fine on 9-14.7V, same it works in your car.
Q. I hear the injector clicking but it isnt spraying!!!
plee help me out
Try reverse flushing first.
Thanks for this great idea, tried it on my Mazda B-series engine's fuel injectors
and it worked... unfortunately mazda injectors are smaller on the nozzle end and the 5cc didn't fit, I had to
just wind teflon tape around the injector and hold on for dear life (the jet popped out a few times). a 3cc
syringe however worked perfectly for reverse flushing.
